Kim, Jiyoung
Permanent URI for this collectionhttps://hdl.handle.net/10735.1/2484
Jiyoung Kim serves as Associate Professor in the Department of Materials Science and Engineering. His research interests include:
- Gate Stack Engineering for the Next Generation Complementary
- Metal-Oxide-Semiconductor (CMOS) Applications
- Nano-structure Materials and Devices for Nanoelectronics
- Novel Atomic Layer Deposition (ALD) Applications
- Novel Memory Device Materials, Fabrication and Applications
- Nano-sensor Fabrication and Applications
ORCID page
Browse
Browsing Kim, Jiyoung by Author "0000-0002-5454-0315 (Addou, R)"
Now showing 1 - 2 of 2
- Results Per Page
- Sort Options
Item Engineering The Palladium-WSe₂ Interface Chemistry for Field Effect Transistors with High-Performance Hole Contacts(Amer Chemical Soc, 2018-12-07) Smyth, Christopher M.; Walsh, Lee A.; Bolshakov, Pavel; Catalano, Massimo; Addou, Rafik; Wang, Luhua; Kim, Jiyoung; Kim, Moon J.; Young, Chadwin D.; Hinkle, Christopher L.; Wallace, Robert M.; 0000-0001-5566-4806 (Wallace, RM); 0000-0003-0690-7423 (Young, CD); 0000-0003-2781-5149 (Kim, J); 0000-0002-6688-8626 (Walsh, LA); 0000-0002-5485-6600 (Hinkle, CD); 0000-0002-5454-0315 (Addou, R); 70133685 (Kim, J); Smyth, Christopher M.; Walsh, Lee A.; Bolshakov, Pavel; Catalano, Massimo; Addou, Rafik; Wang, Luhua; Kim, Jiyoung; Kim, Moon J.; Young, Chadwin D.; Hinkle, Christopher L.; Wallace, Robert M.Palladium has been widely employed as a hole contact to WSe₂ and has enabled, at times, the highest WSe₂ transistor performance. However, there are orders of magnitude variation across the literature in Pd-WSe₂ contact resistance and I-ON/I-OFF ratios with no true understanding of how to consistently achieve high-performance contacts. In this work, WSe₂ transistors with impressive I-ON/I-OFF ratios of 10(6) and Pd-WSe₂ Schottky diodes with near-zero variability are demonstrated utilizing Ohmic-like Pd contacts through deliberate control of the interface chemistry. The increased concentration of a PdSeₓ intermetallic is correlated with an Ohmic band alignment and concomitant defect passivation, which further reduces the contact resistance, variability, and barrier height inhomogeneity. The lowest contact resistance occurs when a 60 min post-metallization anneal at 400 degrees C in forming gas (FG) is performed. X-ray photoelectron spectroscopy indicates this FG anneal produces 3x the concentration of PdSeₓ and an Ohmic band alignment, in contrast to that detected after annealing in ultrahigh vacuum, during which a 0.2 eV hole Schottky barrier forms. Raman spectroscopy and scanning transmission electron microscopy highlight the necessity of the fabrication step to achieve high-performance contacts as no PdSeₓ forms, and WSe₂ is unperturbed by room temperature Pd deposition. However, at least one WSe₂ layer is consumed by the necessary interface reactions that form PdSeₓ requiring strategic exploitation of a sacrificial WSe₂ layer during device fabrication. The interface chemistry and structural properties are correlated with Pd-WSe₂ diode and transistor performance, and the recommended processing steps are provided to enable reliable high-performance contact formation.Item High-κ Dielectric on ReS₂: In-Situ Thermal Versus Plasma-Enhanced Atomic Layer Deposition of Al₂O₃(MDPI AG, 2019-03-30) Khosravi, Ava; Addou, Rafik; Catalano, Massimo; Kim, Jiyoung; Wallace, Robert M.; 0000-0003-2781-5149 (Kim, J); 0000-0001-5566-4806 (Wallace, RM); 0000-0001-9901-9809 (Khosravi, A); 0000-0002-5454-0315 (Addou, R); 70133685 (Kim, J); Khosravi, Ava; Addou, Rafik; Catalano, Massimo; Kim, Jiyoung; Wallace, Robert M.We report an excellent growth behavior of a high-κ dielectric on ReS₂ , a two-dimensional (2D) transition metal dichalcogenide (TMD). The atomic layer deposition (ALD) of an Al₂O₃ thin film on the UV-Ozone pretreated surface of ReS₂ yields a pinhole free and conformal growth. In-situ half-cycle X-ray photoelectron spectroscopy (XPS) was used to monitor the interfacial chemistry and ex-situ atomic force microscopy (AFM) was used to evaluate the surface morphology. A significant enhancement in the uniformity of the Al₂O₃ thin film was deposited via plasma-enhanced atomic layer deposition (PEALD), while pinhole free Al₂O₃ was achieved using a UV-Ozone pretreatment. The ReS₂ substrate stays intact during all different experiments and processes without any formation of the Re oxide. This work demonstrates that a combination of the ALD process and the formation of weak S-O bonds presents an effective route for a uniform and conformal high-κ dielectric for advanced devices based on 2D materials. © 2019 by the authors.