Analyzing of Joint Strength, Impact Energy, and Angular Distortion of the ABS Friction Stir Welded Joints Reinforced by Nanosilica Addition
Azhiri, Reza Bagherian
Sola, Jalal Fathi
Tekiyeh, Ramin Mehdizad
Bideskan, Abolfaz Salmani
MetadataShow full item record
In the present work, experimental investigation has been carried out to enhance the properties of acrylonitrile butadiene styrene joints. Here, nanosilica particle was used as reinforcement to form composite-like structure in the friction stir processed region and improve the joint strength. Experiments were designed based on response surface methodology to correlate relationship between parameters viz. nanosilica volume fraction, pass number, tool rotation speed, and travel speed to responses viz. tensile strength, hardness, and angular distortion. Analysis of variances has also been performed to find which factor has the greatest impact on joint properties. It is found from the results that silica addition and pass number have significant influence on tensile strength and hardness. Also, the angular distortion is mainly influenced by silica volume fraction and tool rotational speed. In order to find optimal combination of process parameter regarding maximum strength and hardness as well as minimum angular distortion, desirability approach function was utilized. The obtained results showed that in order, 20% silica volume fraction, two pass numbers, 1600rpm tool rotation, and 40mm/min travel speed cause desirability of 83%. The optimum results were further verified through confirmatory experiment.
Due to copyright restrictions and/or publisher's policy full text access from Treasures at UT Dallas is limited to current UTD affiliates (use the provided Link to Article).