Vertical Profiles of the 3-D Wind Velocity Retrieved from Multiple Wind Lidars Performing Triple Range-Height-Indicator Scans

item.page.doi

Abstract

Vertical profiles of 3-D wind velocity are retrieved from triple range-height-indicator (RHI) scans performed with multiple simultaneous scanning Doppler wind lidars. This test is part of the eXperimental Planetary boundary layer Instrumentation Assessment (XPIA) campaign carried out at the Boulder Atmospheric Observatory. The three wind velocity components are retrieved and then compared with the data acquired through various profiling wind lidars and high-frequency wind data obtained from sonic anemometers installed on a 300 m meteorological tower. The results show that the magnitude of the horizontal wind velocity and the wind direction obtained from the triple RHI scans are generally retrieved with good accuracy. However, poor accuracy is obtained for the evaluation of the vertical velocity, which is mainly due to its typically smaller magnitude and to the error propagation connected with the data retrieval procedure and accuracy in the experimental setup.

Description

Keywords

Anemometer, Boundary layer (Meteorology), Optical radar, Three-dimensional modeling, Winds, Winds--Speed

item.page.sponsorship

Rights

CC BY 3.0 (Attribution), ©2017 The Authors. All Rights Reserved.

Citation