Wan, S.Li, Y.Mu, JiukeAliev, Ali E.Fang, ShaoliKotov, N. A.Jiang, L.Cheng, Q.Baughman, Ray H.2019-05-152019-05-152018-05-0700278424https://hdl.handle.net/10735.1/6490Includes supplementary materialWe here show that infiltrated bridging agents can convert inexpensively fabricated graphene platelet sheets into high-performance materials, thereby avoiding the need for a polymer matrix. Two types of bridging agents were investigated for interconnecting graphene sheets, which attach to sheets by either π–π bonding or covalent bonding. When applied alone, the π–π bonding agent is most effective. However, successive application of the optimized ratio of π–π bonding and covalent bonding agents provides graphene sheets with the highest strength, toughness, fatigue resistance, electrical conductivity, electromagnetic interference shielding efficiency, and resistance to ultrasonic dissolution. Raman spectroscopy measurements of stress transfer to graphene platelets allow us to decipher the mechanisms of property improvement. In addition, the degree of orientation of graphene platelets increases with increasing effectiveness of the bonding agents, and the interlayer spacing increases. Compared with other materials that are strong in all directions within a sheet, the realized tensile strength (945 MPa) of the resin-free graphene platelet sheets was higher than for carbon nanotube or graphene platelet composites, and comparable to that of commercially available carbon fiber composites. The toughness of these composites, containing the combination of π–π bonding and covalent bonding, was much higher than for these other materials having high strengths for all in-plane directions, thereby opening the path to materials design of layered nanocomposites using multiple types of quantitatively engineered chemical bonds between nanoscale building blocks.enCC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)©2018 National Academy of Sciences. All Rights Reserved.http://creativecommons.org/licenses/by-nc-nd/4.0/AdhesivesGrapheneNanocomposites (Materials)--GrapheneOxides--GraphinearticleWan, S., Y. Li, J. Mu, A. E. Aliev, et al. 2018. "Sequentially bridged graphene sheets with high strength, toughness, and electrical conductivity." Proceedings of the National Academy of Sciences of the United States of America 115(21): 5359-5364, doi:10.1073/pnas.171911111511521