Browsing by Author "Kim, S. J."
Now showing 1 - 7 of 7
- Results Per Page
- Sort Options
Item Conductive Functional Biscrolled Polymer and Carbon Nanotube Yarns(2013-10-10) Kim, S. H.; Sim, H. J.; Shin, M. K.; Choi, A. Y.; Kim, Y. T.; Lima, Marcio D.; Baughman, Ray H.; Kim, S. J.; 0000 0003 5232 4253 (Baughman, RH); Lima, Marcio D.; Baughman, Ray H.Biscrolling aligned electrospun fiber (AEF) sheets and carbon nanotube (CNT) sheets were fabricated for conductive, functional yarns by a versatile dry composite method. Our biscrolling (twist-based spinning) method is based on spinnable polymer fiber sheets and spinnable CNT sheets unlike the previous biscrolling technique using unspinnable nanopowders and spinnable CNT sheets. The CNT sheet in composite yarns acted as effective electrical wires forming dual Archimedean multilayer rolled-up nanostructures. The weight percent of the electrospun polymer fibers in the composite yarns was over 98%, and the electrical conductivity values of the composite yarns was 3 orders higher than those of other non-conducting polymer/CNT composite fibers which were electrospun from polymer solutions containing similar loading of CNTs. We also demonstrate that biscrolled yarns having various structures can be fabricated from spinnable AEF sheets and spinnable CNT sheets.Item Enhancing the Work Capacity of Electrochemical Artificial Muscles by Coiling Plies of Twist-Released Carbon Nanotube Yarns(American Chemical Society) Kim, K. J.; Hyeon, J. S.; Kim, H.; Mun, T. J.; Haines, Carter S.; Li, Na; Baughman, Ray H.; Kim, S. J.; 0000-0001-5845-5137 (Baughman, RH); Haines, Carter S.; Li, Na; Baughman, Ray H.Twisted-yarn-based artificial muscles can potentially be used in diverse applications, such as valves in microfluidic devices, smart textiles, air vehicles, and exoskeletons, because of their high torsional and tensile strokes, high work capacities, and long cycle life. Here, we demonstrate electrochemically powered, hierarchically twisted carbon nanotube yarn artificial muscles that have a contractile work capacity of 3.78 kJ/kg, which is 95 times the work capacity of mammalian skeletal muscles. This record work capacity and a tensile stroke of 15.1% were obtained by maximizing yarn capacitance by optimizing the degree of inserted twist in component yarns that are plied until fully coiled. These electrochemically driven artificial muscles can be operated in reverse as mechanical energy harvesters that need no externally applied bias. In aqueous sodium chloride electrolyte, a peak electrical output power of 0.65 W/kg of energy harvester was generated by 1 Hz sinusoidal elongation. ©2019 American Chemical Society.Item Fabrication of Carbon Nanofiber Electrodes Using Poly(acrylonitrile-co-vinylimidazole) and Their Energy Storage Performance(Springer, 2019-02-02) Jung, K. -H; Kim, S. J.; Son, Y. J.; Ferraris, John P.; Ferraris, John P.For electrodes in electrochemical double-layer capacitors, carbon nanofibers (CNFs) were prepared by thermal treatment of precursor polymer nanofibers, fabricated by electrospinning. Poly(acrylonitrile-co-vinylimidazole) (PAV) was employed as a precursor polymer of carbon nanofibers due to the effective cyclization of PAV polymer chains during thermal treatment compared to a typical precursor, polyacrylonitrile (PAN). PAV solutions with different comonomer compositions were prepared and electrospun to produce precursor nanofibers. Surface images obtained from scanning electron microscopy showed that their nanofibrous structure was well preserved after carbonization. It was also confirmed that electrospun PAV nanofibers were successfully converted to carbon nanofibers after the carbonization step by Raman spectroscopy. Carbon nanofiber electrodes derived from PAV showed higher specific capacitances and energy/power densities than those from PAN, which was tested by coin-type cells. It was also shown that PAV with an acrylonitrile/vinylimidazole composition of 83:17 is most promising for the carbon nanofiber precursor exhibiting a specific capacitance of 114 F/g. Their energy and power density are 70.1 Wh/kg at 1 A/g and 9.5 W/kg at 6 A/g, respectively. In addition, pouch cells were assembled to load the higher amount of electrode materials in the cells, and a box-like cyclic voltammetry was obtained with high capacitances. © Korean Carbon Society 2019.Item Importin-9 Wraps Around the H2A-H2B Core to Act as Nuclear Importer and Histone Chaperone(NLM (Medline)) Padavannil, A.; Sarkar, Prithwijit; Kim, S. J.; Cagatay, T.; Jiou, J.; Brautigam, C. A.; Tomchick, D. R.; Sali, A.; D'Arcy, Sheena; Chook, Y. M.; 0000-0001-5055-988X (D'Arcy, S); Sarkar, Prithwijit; D'Arcy, SheenaWe report the crystal structure of nuclear import receptor Importin-9 bound to its cargo, the histones H2A-H2B. Importin-9 wraps around the core, globular region of H2A-H2B to form an extensive interface. The nature of this interface coupled with quantitative analysis of deletion mutants of H2A-H2B suggests that the NLS-like sequences in the H2A-H2B tails play a minor role in import. Importin-9•H2A-H2B is reminiscent of interactions between histones and histone chaperones in that it precludes H2A-H2B interactions with DNA and H3-H4 as seen in the nucleosome. Like many histone chaperones, which prevent inappropriate non-nucleosomal interactions, Importin-9 also sequesters H2A-H2B from DNA. Importin-9 appears to act as a storage chaperone for H2A-H2B while escorting it to the nucleus. Surprisingly, RanGTP does not dissociate Importin-9•H2A-H2B but assembles into a RanGTP•Importin-9•H2A-H2B complex. The presence of Ran in the complex, however, modulates Imp9-H2A-H2B interactions to facilitate its dissociation by DNA and assembly into a nucleosome. © 2019 Padavannil et al.Item Magnetic Torsional Actuation of Carbon Nanotube Yarn Artificial Muscle(Royal Society of Chemistry) Lee, D. W.; Kim, S. H.; Kozlov, Mikhail E.; Lepró, Xavier; Baughman, Ray H.; Kim, S. J.; 0000 0003 5232 4253 (Baughman, RH); 0000-0002-0166-3127 (Lepró, X); 0000-0001-5845-5137 (Baughman, RH); Kozlov, Mikhail E.; Lepró, Xavier; Baughman, Ray H.Magnetically driven torsional actuation of a multiwalled carbon nanotube (MWNT) yarn was realized by first biscrolling NdFeB magnetic particles into helical yarn corridors to make a magnetic MWNT yarn. The actuating device comprised a pristineMWNT yarn that was connected to the magnetic MWNT yarn, with a paddle attached between these yarns. The application of a magnetic field reversibly drove torsional actuation of up to 80° within ∼0.67 seconds. This magnetic actuator was remotely powered, and its actuation stroke was the same when the muscle array was at 20 °C and at -100 °C.Item Orthogonal Pattern of Spinnable Multiwall Carbon Nanotubes for Electromagnetic Interference Shielding Effectiveness(Elsevier Ltd, 2019-05-022) Lee, D. W.; Kim, H.; Moon, J. H.; Jeong, J. -H; Sim, H. J.; Kim, B. J.; Hyeon, J. S.; Baughman, Ray H.; Kim, S. J.; 0000-0001-5845-5137 (Baughman, RH); Baughman, Ray H.The need for thin and lightweight electromagnetic interference shielding materials is rapidly increasing in several industries, such as aerospace and telecommunication. This research finds that a shielding material, which is developed by the orthogonal pattern of spinnable multiwall carbon nanotubes (MWNTs), is ultra-light weight, thin, and has a high shielding effectiveness (SE). An orthogonal pattern, generated by just alignment of the spinnable MWNTs without adding any support materials such as polymers, ceramics, and magnets demonstrates that it is possible to efficiently attenuate electromagnetic interference (EMI) in the X-band frequency range (8.2–12.4 GHz). EMI SE in the developed shielding material is about 19.2 dB with a specific shielding effectiveness (SSE)/t (thickness) value of 73,633 dB cm² g⁻¹ at a thickness of about 4.48 μm. In addition, absorption effectiveness in this shielding material is as high as 96.3%, which provides excellent ability to reduce the secondary damage by reflection. ©2019 Elsevier LtdItem Realization of Spatially Addressable Library by a Novel Combinatorial Approach on Atomic Layer Deposition: A Case Study of Zinc Oxide(American Chemical Society, 2019-05-07) Kim, Harrison Sejoon; Lee, Joy S.; Kim, S. J.; Lee, Jaebeom; Lucero, Antonio T.; Sung, M. M.; Kim, Jiyoung; 0000-0003-2781-5149 (Kim, J); 0000-0002-6488-5915 (Kim, HS); 70133685 (Kim, J); Kim, Harrison Sejoon; Lee, Joy S.; Lee, Jaebeom; Lucero, Antonio T.; Kim, JiyoungThough the synthesis of libraries of multicomponent metal oxide systems is prevalent using the combinatorial approach, the combinatorial approach has been rarely realized in studying simple metal oxides, especially applied to the atomic layer deposition (ALD) technique. In this literature, a novel combinatorial approach technique is utilized within an ALD grown simple metal oxide to synthesize a "spatially addressable combinatorial library". The two key factors in gradients were defined during the ALD process: (1) the process temperature and (2) a nonuniform flow of pulsed gases inside a cross-flow reactor. To validate the feasibility of our novel combinatorial approach, a case study of zinc oxide (ZnO), a simple metal oxide whose properties are well-known, is performed. Because of the induced gradient, the ZnO (002) crystallite size was found to gradually vary across a 100 mm wafer (10-20 nm) with a corresponding increase in the normalized Raman E 2 /A 1 peak intensity ratio. The findings agree well with the visible grain size observed from scanning electron microscope. The novel combinatorial approach provides a means of systematical interpretation of the combined effect of the two gradients, especially in the analysis of the microstructure of ZnO crystals. Moreover, the combinatorial library reveals that the process temperature, rather than the crystal size, plays the most significant role in determining the electrical conductivity of ZnO. © 2019 American Chemical Society.