Browsing by Author "Addou, Rafik"
Now showing 1 - 9 of 9
- Results Per Page
- Sort Options
Item Atomically Thin Resonant Tunnel Diodes Built from Synthetic van der Waals Heterostructures(Nature Pub. Group) Lin, Yu-Chuan; Ghosh, Ram Krishna; Addou, Rafik; Lu, Ning; Eichfeld, Sarah M.; Zhu, Hui; Li, Ming-Yang; Peng, Xin; Kim, Moon J.; Li, Lain-Jong; Wallace, Robert M.; Datta, Suman; Robinson, Joshua A.; A-5283-2008 (Wallace, RM); A-2297-2010 (Kim, MJ)Vertical integration of two-dimensional van der Waals materials is predicted to lead to novel electronic and optical properties not found in the constituent layers. Here, we present the direct synthesis of two unique, atomically thin, multi-junction heterostructures by combining graphene with the monolayer transition-metal dichalcogenides: molybdenum disulfide (MoS₂), molybdenum diselenide (MoSe₂) and tungsten diselenide (WSe₂). The realization of MoS₂-WSe₂-graphene and WSe₂-MoS₂-graphene heterostructures leads to resonant tunnelling in an atomically thin stack with spectrally narrow, room temperature negative differential resistance characteristics.;Item Covalent Nitrogen Doping in Molecular Beam Epitaxy-Grown and Bulk WSe₂(American Institute of Physics Inc, 2018-10-22) Khosravi, Ava; Addou, Rafik; Smyth, Christopher M.; Yue, Ruoyu; Cormier, Christopher R.; Kim, Jiyoung; Hinkle, Christopher L.; Wallace, Robert M.; 0000-0002-5454-0315 (Addou, R); 0000-0003-2781-5149 (Kim, J); 0000-0001-5566-4806 (Wallace, RM); 70133685 (Kim, J); Addou, Rafik; Smyth, Christopher M.; Yue, Ruoyu; Cormier, Christopher R.; Kim, Jiyoung; Hinkle, Christopher L.; Wallace, Robert M.Covalent p-type doping of WSe₂ thin films grown by molecular beam epitaxy and WSe₂ exfoliated from bulk crystals is achieved via remote nitrogen plasma exposure. X-ray photoelectron and Raman spectroscopies indicate covalently bonded nitrogen in the WSe₂ lattice as well as tunable nitrogen concentration with N₂ plasma exposure time. Furthermore, nitrogen incorporation induces compressive strain on the WSe₂ lattice after N₂ plasma exposure. Finally, atomic force microscopy and scanning tunneling microscopy reveal that N₂ plasma treatment needs to be carefully tuned to avoid any unwanted strain or surface damage.Item Engineering The Palladium-WSe₂ Interface Chemistry for Field Effect Transistors with High-Performance Hole Contacts(Amer Chemical Soc, 2018-12-07) Smyth, Christopher M.; Walsh, Lee A.; Bolshakov, Pavel; Catalano, Massimo; Addou, Rafik; Wang, Luhua; Kim, Jiyoung; Kim, Moon J.; Young, Chadwin D.; Hinkle, Christopher L.; Wallace, Robert M.; 0000-0001-5566-4806 (Wallace, RM); 0000-0003-0690-7423 (Young, CD); 0000-0003-2781-5149 (Kim, J); 0000-0002-6688-8626 (Walsh, LA); 0000-0002-5485-6600 (Hinkle, CD); 0000-0002-5454-0315 (Addou, R); 70133685 (Kim, J); Smyth, Christopher M.; Walsh, Lee A.; Bolshakov, Pavel; Catalano, Massimo; Addou, Rafik; Wang, Luhua; Kim, Jiyoung; Kim, Moon J.; Young, Chadwin D.; Hinkle, Christopher L.; Wallace, Robert M.Palladium has been widely employed as a hole contact to WSe₂ and has enabled, at times, the highest WSe₂ transistor performance. However, there are orders of magnitude variation across the literature in Pd-WSe₂ contact resistance and I-ON/I-OFF ratios with no true understanding of how to consistently achieve high-performance contacts. In this work, WSe₂ transistors with impressive I-ON/I-OFF ratios of 10(6) and Pd-WSe₂ Schottky diodes with near-zero variability are demonstrated utilizing Ohmic-like Pd contacts through deliberate control of the interface chemistry. The increased concentration of a PdSeₓ intermetallic is correlated with an Ohmic band alignment and concomitant defect passivation, which further reduces the contact resistance, variability, and barrier height inhomogeneity. The lowest contact resistance occurs when a 60 min post-metallization anneal at 400 degrees C in forming gas (FG) is performed. X-ray photoelectron spectroscopy indicates this FG anneal produces 3x the concentration of PdSeₓ and an Ohmic band alignment, in contrast to that detected after annealing in ultrahigh vacuum, during which a 0.2 eV hole Schottky barrier forms. Raman spectroscopy and scanning transmission electron microscopy highlight the necessity of the fabrication step to achieve high-performance contacts as no PdSeₓ forms, and WSe₂ is unperturbed by room temperature Pd deposition. However, at least one WSe₂ layer is consumed by the necessary interface reactions that form PdSeₓ requiring strategic exploitation of a sacrificial WSe₂ layer during device fabrication. The interface chemistry and structural properties are correlated with Pd-WSe₂ diode and transistor performance, and the recommended processing steps are provided to enable reliable high-performance contact formation.Item Enhancing Interconnect Reliability and Performance by Converting Tantalum to 2D Layered Tantalum Sulfide at Low Temperature(Wiley-VCH Verlag, 2019-06-11) Lo, C. -L; Catalano, Massimo; Khosravi, Ava; Ge, W.; Ji, Y.; Zemlyanov, D. Y.; Wang, Luhua; Addou, Rafik; Liu, Y.; Wallace, Robert M.; Kim, Moon J.; Chen, Z.; 0000-0001-5566-4806 (Wallace, RM); Catalano, Massimo; Khosravi, Ava; Wang, Luhua; Addou, Rafik; Wallace, Robert M.; Kim, Moon J.The interconnect half-pitch size will reach ≈20 nm in the coming sub-5 nm technology node. Meanwhile, the TaN/Ta (barrier/liner) bilayer stack has to be >4 nm to ensure acceptable liner and diffusion barrier properties. Since TaN/Ta occupy a significant portion of the interconnect cross-section and they are much more resistive than Cu, the effective conductance of an ultrascaled interconnect will be compromised by the thick bilayer. Therefore, 2D layered materials have been explored as diffusion barrier alternatives. However, many of the proposed 2D barriers are prepared at too high temperatures to be compatible with the back-end-of-line (BEOL) technology. In addition, as important as the diffusion barrier properties, the liner properties of 2D materials must be evaluated, which has not yet been pursued. Here, a 2D layered tantalum sulfide (TaSₓ) with ≈1.5 nm thickness is developed to replace the conventional TaN/Ta bilayer. The TaSx ultrathin film is industry-friendly, BEOL-compatible, and can be directly prepared on dielectrics. The results show superior barrier/liner properties of TaSₓ compared to the TaN/Ta bilayer. This single-stack material, serving as both a liner and a barrier, will enable continued scaling of interconnects beyond 5 nm node. ©2019 WILEY-VCH Verlag GmbH & Co. KGaA, WeinheimItem High-κ Dielectric on ReS₂: In-Situ Thermal Versus Plasma-Enhanced Atomic Layer Deposition of Al₂O₃(MDPI AG, 2019-03-30) Khosravi, Ava; Addou, Rafik; Catalano, Massimo; Kim, Jiyoung; Wallace, Robert M.; 0000-0003-2781-5149 (Kim, J); 0000-0001-5566-4806 (Wallace, RM); 0000-0001-9901-9809 (Khosravi, A); 0000-0002-5454-0315 (Addou, R); 70133685 (Kim, J); Khosravi, Ava; Addou, Rafik; Catalano, Massimo; Kim, Jiyoung; Wallace, Robert M.We report an excellent growth behavior of a high-κ dielectric on ReS₂ , a two-dimensional (2D) transition metal dichalcogenide (TMD). The atomic layer deposition (ALD) of an Al₂O₃ thin film on the UV-Ozone pretreated surface of ReS₂ yields a pinhole free and conformal growth. In-situ half-cycle X-ray photoelectron spectroscopy (XPS) was used to monitor the interfacial chemistry and ex-situ atomic force microscopy (AFM) was used to evaluate the surface morphology. A significant enhancement in the uniformity of the Al₂O₃ thin film was deposited via plasma-enhanced atomic layer deposition (PEALD), while pinhole free Al₂O₃ was achieved using a UV-Ozone pretreatment. The ReS₂ substrate stays intact during all different experiments and processes without any formation of the Re oxide. This work demonstrates that a combination of the ALD process and the formation of weak S-O bonds presents an effective route for a uniform and conformal high-κ dielectric for advanced devices based on 2D materials. © 2019 by the authors.Item MoS₂ Functionalization for Ultra-Thin Atomic Layer Deposited DielectricsAzcatl, Angelica; McDonnell, Stephen; KC, Santosh; Peng, Xin; Dong, Hong; Qin, Xiaoye; Addou, Rafik; Mordi, Greg I.; Lu, Ning; Kim, Jiyoung; Kim, Moon J.; Cho, Kyeongjae; Wallace, Robert M.; 70133685 (Kim, J)The effect of room temperature ultraviolet-ozone (UV-O₃) exposure of MoS₂ on the uniformity of subsequent atomic layer deposition of Al₂O₃ is investigated. It is found that a UV-O₃ pre-treatment removes adsorbed carbon contamination from the MoS₂ surface and also functionalizes the MoS₂ surface through the formation of a weak sulfur-oxygen bond without any evidence of molybdenum-sulfur bond disruption. This is supported by first principles density functional theory calculations which show that oxygen bonded to a surface sulfur atom while the sulfur is simultaneously back-bonded to three molybdenum atoms is a thermodynamically favorable configuration. The adsorbed oxygen increases the reactivity of MoS₂ surface and provides nucleation sites for atomic layer deposition of Al₂O₃. The enhanced nucleation is found to be dependent on the thin film deposition temperature.Item Nucleation and Growth of WSe₂: Enabling Large Grain Transition Metal Dichalcogenides(IOP Publishing Ltd, 2017-09-22) Yue, Ruoyu; Nie, Yifan; Walsh, Lee A.; Addou, Rafik; Liang, Chaoping; Lu, Ning; Barton, Adam T.; Zhu, Hui; Che, Zifan; Barrera, Diego; Cheng, Lanxia; Cha, Pil-Ryung; Chabal, Yves J.; Hsu, Julia W. P.; Kim, Jiyoung; Kim, Moon J.; Colombo, Luigi; Wallace, Robert M.; Cho, Kyeongjae; Hinkle, Christopher L.; 0000-0002-2910-2938 (Liang, C); Yue, Ruoyu; Nie, Yifan; Walsh, Lee A.; Addou, Rafik; Liang, Chaoping; Lu, Ning; Barton, Adam T.; Zhu, Hui; Che, Zifan; Barrera, Diego; Cheng, Lanxia; Chabal, Yves J.; Hsu, Julia W. P.; Kim, Jiyoung; Kim, Moon J.; Wallace, Robert M.; Cho, Kyeongjae; Hinkle, Christopher L.The limited grain size (< 200 nm) for transition metal dichalcogenides (TMDs) grown by molecular beam epitaxy (MBE) reported in the literature thus far is unsuitable for high-performance device applications. In this work, the fundamental nucleation and growth behavior of WSe₂ is investigated through a detailed experimental design combined with on-lattice, diffusion-based first principles kinetic modeling to enable large area TMD growth. A three-stage adsorption-diffusion-attachment mechanism is identified and the adatom stage is revealed to play a significant role in the nucleation behavior. To limit the nucleation density and promote 2D layered growth, it is necessary to have a low metal flux in conjunction with an elevated substrate temperature. At the same time, providing a Se-rich environment further limits the formation of W-rich nuclei which suppresses vertical growth and promotes 2D growth. The fundamental understanding gained through this investigation has enabled an increase of over one order of magnitude in grain size for WSe₂ thus far, and provides valuable insight into improving the growth of other TMD compounds by MBE and other growth techniques such as chemical vapor deposition (CVD).Item Tuning Electronic Transport in Epitaxial Graphene-Based Van Der Waals Heterostructures(RSC Pub) Lin, Yu-Chuan; Li, Jun; de la Barrera, Sergio,C.; Eichfeld, Sarah M.; Nie, Yifan; Addou, Rafik; Mende, Patrick C.; Wallace, Robert M.; Cho, Kyeongjae; Feenstra, Randall M.; Robinson, Joshua A.; 0000-0001-5566-4806 (Wallace, RM); 0000-0003-2698-7774 (Cho, K); Nie, Yifan; Addou, Rafik; Wallace, Robert M.; Cho, KyeongjaeTwo-dimensional tungsten diselenide (WSe₂) has been used as a component in atomically thin photovoltaic devices, field effect transistors, and tunneling diodes in tandem with graphene. In some applications it is necessary to achieve efficient charge transport across the interface of layered WSe₂-graphene, a semiconductor to semimetal junction with a van der Waals (vdW) gap. In such cases, band alignment engineering is required to ensure a low-resistance, ohmic contact. In this work, we investigate the impact of graphene electronic properties on the transport at the WSe₂-graphene interface. Electrical transport measurements reveal a lower resistance between WSe₂ and fully hydrogenated epitaxial graphene (EGFH) compared to WSe₂ grown on partially hydrogenated epitaxial graphene (EGPH). Using low-energy electron microscopy and reflectivity on these samples, we extract the work function difference between the WSe₂ and graphene and employ a charge transfer model to determine the WSe₂ carrier density in both cases. The results indicate that WSe₂-EGFH displays ohmic behavior at small biases due to a large hole density in the WSe₂, whereas WSe₂-EGPH forms a Schottky barrier junction.;Item Using Photoelectron Spectroscopy in the Integration of 2D Materials for Advanced Devices(Elsevier Science B.V., 2019-01-31) Addou, Rafik; Wallace, Robert M.; 0000-0001-5566-4806 (Wallace, RM); Addou, Rafik; Wallace, Robert M.The first commercial applications of two dimensional (2D) layered materials such as graphite and MoS₂ used their lubricant properties. Following the discovery of graphene and its potential applications in various fields, increased interest has focused on other 2D materials such as transition metal dichalcogenides (TMDs) offering tremendous opportunities in advanced optoelectronics and ultra-thin electronics. Using X-ray photoelectron spectroscopy (XPS), this review addresses the facets of the device fabrication and integration and correlates at the nanometer scale the device behavior to the TMD properties. Understanding and solving the integration challenges will make the TMD technology jump from the current phase of experimental proof of concept and laboratory research to a relevant prototype demonstration and production phase.